WIRED HDH Programmable Flat Switch Panel (8 Switch) FSP series (5' Harness)

WIRED HDH patent pending Flat Switch Panel (FSP) is the easiest, most versatile switch panel on the market today!  No thicker than a credit card, a footprint smaller than a dollar bill, flexible, and programmabe makes our line of switch panels the best for ANY application!
 
Being programmable, the FSP series gives you options on how to control any of your accesories. No other panel on the market gives you so many features straight out of the box!

• Features:
  Keypad: 1/32" thick and measures 5.5" x 1.75"
• Compact control unit measuring 6.5" x 3.25" x 1.25"
• 8 switches in an area smaller than a dollar bill.
• Keypad and control unit are water and chemical resistant. and completely splash proof
• Easy, intuitive, "on the fly" programming. Takes less than 30 seconds! See how it works in out video section!
• Individual switches can be "programmed" to be momentary or sustained
• Individual switches can be "programmed" to be active all the time,  or only when the ignition key is on
• Each individual output is electronically fused for 2.5 amps - letting you run many accessories direct, or adding relays to run anything else!
• Automatic low voltage protection - shuts down your accessories if the battery drops below a certain level
• Water and Chemical resistant. Completely splash proof
• Keypad is UV resistant for long life when mounted in open cabs
• Switch life rating is  >1,000,000 activations
• Comes with WIRED HDH 2 year warranty   

WIRED's programmable Flat Switch Panel (FSP) comes with an eight button key pad, a control box, a 5' harness, and all the mounting and wiring accessories necessary to install the system in most vehicles.

Key Pad:  Eight  programmable buttons in a single membrane key pad that is the thickness of a credit card.  Each button is a tactile dome rated for 1,000,000 presses.  Each button is programmable to make it either (1) a sustained button (like a rocker or toggle turning on/off an accessory) or (2) a momentary button (like a horn or winch in/out button) AND each button can be programmed to make it active either (1) all the time (a.k.a. wired battery direct) or (2) only with the ignition activated (a.k.a. when you turn your key on).  Programming takes less than 30 seconds per switch.

Control Unit: A small, remote-mounted control box which is the brain that allows the programmability of the key pad.  All accessories added to a vehicle are routed to the Control Unit.  The outputs of the Control Unit correspond with a button on the Keypad. Each output is rated to handle 2.5 amps and is auto current limiting. This means if you are powering something that requires more than 2.5 amps, or if you develop a short, the output will automatically turn off. Once the problem is solved, the output will regain power. Add a relay, and control any number of high powered accessories!

Harness: A 5' harness with 2 locking connectors to link the keypad to the control box.  The harness allows you to mount the Control Unit in an easily accessible area in the vehicle for easy addition of multiple accessories, whether the accessories are added all at once or added over a period of time.